5 Best Hybrid Table Saws Review

For a substantial amount of time, woodworkers with comparatively heavier workloads had to choose between a contractor or a cabinet table saw. Now, this posed a set of issues – namely, the lack of something in the middle.

Contractor saws were not as powerful, while cabinets were too expensive and hefty. That is when hybrid table saws came in and turned things around with a sweet spot between portability, expense, and functionalities.

And perhaps that is why you are looking to buy one. Well then, let’s find out what the best hybrid table saws are for you. There is an extensive range of options, so let’s move ahead.

Powermatic PM100 Table Saw

Something you will miss in small, portable saws is a large workspace that makes your job much more convenient. Many of the quality hybrid saws alleviate that problem by introducing an extended table, like our first pick.

It features Powermatic’s unique 52-inch Accu-Fence system. That means you will have sufficient space for when you are cutting larger boards. Another crucial part is the quality of the working surface.

You get a precision-ground cast iron working surface that is very sturdy and durable. Moreover, it allows you to create clean, accurate cuts. And the beveled edges help ensure a smoother experience.

This product can effortlessly handle a decent amount of workloads too. It features a 1.75 horsepower motor that can offer an excellent result in most cases. Moreover, to ensure that you can use it without needing any alterations, it runs on 115V power.

In terms of the blade, it comes with a 10” blade out of the box. It’s decent in quality and can do most of your cutting. Along with that, the Poly-V belt drive system helps keep the vibration in check to improve efficiency.

An issue with many products is that the miter gauge is not very flexible. But in this case, you get one that can pivot 60 degrees both to the right and left. Moreover, the arbor lock allows for one-handed blade changes.  

Pros

  • Extensive 52” fence system
  • Poly-V belt drive system
  • Adjustable miter gauge
  • One-handed changing of blades
  • Durable cast iron tabletop 

Cons

  • Higher horsepower would’ve been better
  • Dust collection is okay

2. SawStop Professional Saw

SawStop Professional Saw

You probably know the sheer number of accidents that occur while operating table saws (a lot, if you were wondering). Our next product comes with an excellent feature to ensure your safety.  

Whenever it comes into contact with human skin, the blade gives the circuit a signal to turn off, and the blade moves out of its place. What’s even more astonishing is that all of this happens in less than five milliseconds.

This table saw also uses a T-Glide fence assembly made of high-quality steel. It ensures a sturdy lockdown, and you can get through square cutting without any hassle. Moreover, the 52-inch size means you’ll always have an adequate workspace.

Another crucial part of a table saw is that it ensures an impressive 99% dust capture with the table’s mechanism. You can also add SawStop’s blade guard and overarm collector over the 1.75 horsepower motor, which you can buy separately.

Another thing we like about it is the arbor, which is surprisingly precise. Moreover, it uses a gas piston elevation system that enhances adjustability. And to keep your measurements strict, the table’s flatness is measured at a maximum 0.010” gap.

Furthermore, it houses a powerful control box to make sure that you have a solid experience. You can find the on-off switch, onboard computer, and all the necessities that work in conjunction to keep things running smoothly.

Pros

  • 52” T-Glide fence assembly
  • Superb build quality and materials
  • Excellent safety system
  • Gas piston elevation system
  • 99% dust collection 

Cons

  • A bit heavy
  • Fence system could use some work

3. Shop Fox W1819 Table Saw

Shop Fox W1819 Table Saw

Up next, we have a robust table saw that can cut through your materials like a cakewalk. For some workloads, having sheer power is necessary. This product comes with a motor that can output three horsepower.

And as you know, having a high-quality tabletop is paramount, as it determines whether you can achieve an accurate result. This top uses precision ground, polished cast iron to ensure remarkable durability and accuracy.

Moreover, the wings and iron trunnions use the same quality material, so no worries on that front. In terms of the rip capacity, this version of the saw can go up to 29-1/2 inches, which is decent for ripping boards.

When it comes to the fence system, it is necessary to ensure a smooth gliding surface and sturdy camlock. Thankfully, this product uses the well-known easy-glide T-fence system, which means the camlock will hold things in place.  

Moreover, the smooth gliding nylon runners play their role in providing a better experience. This product weighs around 457 pounds, which is reasonable for its power and capacity. The riving knife and blade guard support quick release too.

It has a magnetic switch that turns itself off if there is a thermal overload or power outage. Lastly, there is an adjustable T-slot miter gauge that supports flip stops and has an anodized extension.

Pros

  • Decent 29-1/2” rip capacity
  • T-slot miter gauge with flip stop
  • Precision ground cast iron table
  • T-fence system with a phenolic fence
  • Quick-release riving knife 

Cons

  • Requires 220V power outlet
  • Needs some aligning at first 

4. Laguna Fusion Table Saw

Laguna Fusion Table Saw

If you want a saw that will not cost a premium and still manage to accomplish the slightly heavier tasks, then our next pick is for you. It is a reasonably priced product with a 1.75 horsepower motor that can go up to a hefty 4500 RPM.

There is a benefit in not using a high horsepower motor, however. It means you do not have to go through the extra hassles of installing a 220V outlet to use it. Unsurprisingly, this one is a 115V single-phase motor.

And thanks to the compact design, it only weighs around 240 pounds. In terms of the blade’s diameter, it uses a 10” blade, which comes in the package. The arbor’s diameter is 5/8 inches, along with a 3-1/8” rip capacity.  

Another thing we like is the quick release system, which improves the user experience by miles. And this mechanism applies for both the riving knife and the blade guard alike.

The riving knife and the blade guard offer remarkable kickback prevention and debris control for safety and convenience. Moreover, it comes with a built-in mobility kit that we think works well. The blade also tilts up to 45 degrees.

This tilt allows you to make beveled cuts. Lastly, its square design allows for better contact with the cast table. Moreover, this design also plays a role in ensuring a comfortable time changing blades.

Pros

  • Dustless cabinet system
  • Zero-clearance throatplate
  • Powerful 4500 RPM motor 
  • Up to 45 degrees tilt
  • 3-1/8 inches rip capacity

Cons

  • Dust collection needs work
  • Blade insert system is average

5. Shop Fox W1837 Table Saw

Shop Fox W1837 Table Saw

As our final pick, we have another hybrid table saw for Shop Fox. This product is a rather powerful one that can withstand hefty workloads. First, let’s talk about the two horsepower motor that it boasts.

The greatest thing about it is that it is a single-phase motor that can also run on a 120V circuit and necessitates a 20A output. This property ensures you do not have to change your electrical outlets.

A property of hybrid saws is that they have bottoms like cabinet saws. Unsurprisingly, this one also has an enclosed base with a four-inch dust collection port. The debris capturing system is rather impressive too.

As you know, the rip capacity is crucial. You get an impressive capacity of 30 inches to the right and 15 inches to the left here. That means you can rip large blocks of wood with comparative ease.

And in terms of the tabletop, this product features a precision-ground cast iron table with steel wings measuring 40-1/4” x 27”. Having this kind of material allows it to be very accurate and provide sufficient workspace.

This saw’s weight is around 243 pounds, which is not too much considering what it offers. It also features a lift-off fence that you can lock from both the front and back, which helps with the accuracy.

Pros

  • Powerful motor with two horsepower
  • Runs on 120V as well
  • Cast iron table and steel wings
  • 30” rip capacity to the right
  • Fence with locking ability

Cons

  • Fence’s measurement isn’t perfect
  • Table is occasionally little bowed

Things to Consider Before Buying

The unique bit about hybrid saws is that they have some of the broadest range of properties. That is perhaps since it takes in a lot of features from various categories of products.

And that means that choosing one for yourself becomes a bit tougher than usual. Hence, to find the right saw for you, here is a brief guide.

Hybrid Saws – Why and How?

The first step to choosing a table saw for your woodworking projects is to know its properties so that you can determine whether it’s right for you. As you might recall, hybrids filled a void between contractors and cabinets.

So, why exactly is it necessary, and why should you not just get either of those? The first issue with something like a contractor or a Jobsite saw is that they might fall short of a professional workload.

Even the casual DIYers are okay with those, but when you start getting serious, it might not be enough. Sure, you could just buy a cabinet saw. But as you know, that would leave a noticeable dent in your wallet.

Hybrid Table Saws

Not just that, it would also be challenging to move it without outside help (or maybe a forklift?). Moreover, it would take a lot of space in your workshop, which is not something all of us can afford.

That is why hybrid saws are superb. They will give you the strength (to some extent) of a cabinet saw without bringing along its cons.

Rip Capacity

Your saw’s rip capacity is undoubtedly one of the most crucial factors that decide what you can do with it. Essentially, it refers to the amount of space that you have between the edge of the blade and the end of the saw’s fence.

As a rule of thumb, if you intend to work with materials such as plywood or broader boards, it is wise to have a rip capacity over 24”. And since you are looking to buy a hybrid saw, the chances are that you might need that.

Dust Collection

As you know, your table saw will create a lot of dust and debris while cutting a material. While the amount of that could slightly depend on your blade and the material, it is unavoidable nonetheless. 

A standard method for this is an overarm dust collector. As the name suggests, these can capture the dust from above the saw. All you’ve got to do is connect these to the base of the product, and they will do the rest.

Hybrid Table Saws

The convenient part is that you can often find these independently and attach them to your product. You can also find dust collection ports built into your table saw.

It might also have a powerful vacuum system that will suck the debris inside and store it in a dust collection bag. Good quality bags even have improved filtering system to ensure that nothing gets out of them.

Some products also have a combination of both to improve efficiency. Therefore, try to make sure that the saw you get has a reliable dust capture system.

Pricing vs. Performance

This section is the most vital one for most people. There is a reason you are not settling for a cheaper, portable table saw. Hybrid saws may be comparatively heavier and more expensive, but they provide some necessary upgrades.

While you can find some surprisingly cheap options, we would not suggest going down that path. Products such as this are some of the essential parts of a woodworking shop.

Therefore, finding a sweet balance between price and performance without opting for low-end products is always preferable. Yes, you might get persuaded by the best Grizzly table saw review, but remember those will not offer you the level of portability of a hybrid table saw.

Motor

One of the most noteworthy distinctions between a typical portable table saw and a hybrid saw would be the motor. Some of these products will have comparatively powerful motors that can easily cut through materials without making much noise.

On the other hand, a compact saw, for instance, will often use a motor that creates a lot of noise and will not provide that much strength. These are usually limited to 3 horsepower, which is decent enough.

 Hybrid Table Saw

But, many of the hybrid saws have enclosed motors that resemble that of a cabinet saw. And that makes sense, as they can often get up to 5 horsepower as their bigger brothers can. Therefore, hybrids do well in this area too.

Power 

You will generally find saws in two categories – 110V or 220V. Having the former one allows you to run your tool on a typical domestic circuit without any hassle. However, it might result in increased heat output.

On the other hand, 220V saws pack a bit more punch, and you might need to make some changes to use them in your workshop. But these are much more efficient when it comes to usage for extended periods without generating much heat.

Blades

Most of the products you can buy generally come with a 10-inch saw blade. While these are decent enough, manufacturers often save some cost in this area to keep the prices within your reach.

However, do not avoid a product just because it comes with an average blade. This part is one of the cheapest upgrades you can make, and we would even recommend doing so if you want the best results for professional workloads.

If you want to use dado blades with the saw, ensure that product has support for that. Moreover, it needs to support the size if you already have one.

Tilting

Thankfully, most saws come with tiltable blades nowadays. Suppose you need to make beveled cuts, this a must-have feature for you. You will usually find products that offer a 45-degree tilt at maximum.

Riving Knife or Splitter

Safety is essential for any woodworking tool, whether it's hybrid table saw or a cordless jigsaw. And when it comes to table saws, kickbacks can turn out to be quite dangerous. That is when a riving knife or splitter comes in.

The former is extremely handy, as it moves up and down along with the saw’s blade to ensure your safety and avoid kickbacks. A splitter does the same job to some extent. However, they are not as flexible as riving knives as they do not move.

Blade Guards

A blade guard is quite crucial for both your convenience and safety. Essentially, this part is a cover for your blade that stays on even when working. Hence, it plays a role in preventing debris from flying around the workshop. And if you're buying table saws for small shop, you must be mindful of this feature.

Automatic Magnetic Switch

Apart from the hand saws for cutting wood, table saws are extremely powerful, and therefore, somewhat dangerous. Many accidents occur due to machinery automatically starting once it recovers from a power outage.

And no matter how careful you are, forgetting to turn it off is not impossible. Thankfully, a magnetic switch is there to ensure that the controller automatically shifts to the power off position once it loses power, enhancing safety measures.

Frequently Asked Questions 

1. Why are dado blades illegal in some places?

Not many countries or states enforce this. For instance, the UK required users not to change or use dado blades since it requires removing the riving knives and blade guards, which might result in accidents, and hence unsafe.

2. Will an 8” blade work with my 10” blade supported saw?

While larger blades than the recommended size is a huge no-no, you can use an eight-inch one on a ten-inch supported saw, as long as the arbor hole’s size is identical. However, there is no guarantee that it’ll be flawless. 

3. Which sized saw is the most accurate?

A saw can be very portable and still be surprisingly accurate. The accuracy of a saw depends more on the quality of things like the rip fence more than it does on its size.

4. Will a step-up transformer be able to reach 220V?

That is not a viable option, unfortunately, unless you already have a 220V outlet. And even if you manage to get it to work somehow, the chances are that it will end up overdrawing the amperage on the circuit, which is not what we want.

5. Can I make my workshop support 220V?

That is possible with the help of an electrician. All you have to tell them what equipment you are planning to run on it, as your tool’s amperage will also play a part in how he/she will set it up.

Final Words

Due to their diversity, finding the best hybrid table saws is far from being an easy task. Moreover, you need to do tons of research regarding whether it suits your budget, your workload, and so on. So, we have listed them for you – all you’ve got to do is choose.  

Leave a Comment